Description
AirDog Fuel Air Separation System 165 GPH / II-5G DF-165-5G / 2004.5-2024 Dodge/Ram 5.9L & 6.7L Cummins - A7SABD526
Manufacturer: PureFlow AirDog
Fits: 2004.5-2024 Dodge/Ram 5.9L & 6.7L Cummins
The AirDog II-5G is AirDog's current fuel air separation system. It pulls air, vapor, water and dirt out of the fuel before it ever gets to your injection pump, then sends clean, steady fuel pressure up front. Fuel the engine doesn't use is recirculated back through the filter base.
New on the 5G is a diaphragm pressure regulator built right into the unit. It gives you more room to adjust fuel pressure, holds flow better under pressure, and can be set up for boost compensation with AirDog's Boost Compensation Kit (sold separately). The 5G also has larger ports and an upgraded 12 gauge wiring harness with a Metri-Pack 280 connector at the pump.
The 165 GPH version is aimed at moderately modified trucks where the fuel demand has gone up past what the factory setup was built for.
How it installs on this truck
- Frame-rail mount with the supplied sandwich plate bracket
- Fuel Module Upgrade kit goes in the factory fuel basket (1/2" bulkhead pickup)
- Feeds the injection pump directly and bypasses the factory filter housing
What's in the box
- Pump assembly with fuel filter and water separator
- Relay wiring harness
- Fuel fittings for this application
- 1/2" fuel line
- Mounting brackets and hardware
- Installation manual
- Fuel Module Upgrade kit
Check AirDog's install manual for the full parts list for your kit. No tools are included.
Install is designed to be done with basic hand tools and the occasional drill. Quick connect fittings make the plumbing simple.
Replacement filters (2 micron fuel filter and water separator) are available. Ask us if you need them.
Free shipping.
As always if you have any questions feel free to contact us. We are happy to help you pick the right pump for your truck.
