Description
Fits: 2013-2016 Chevrolet Silverado/GMC Sierra 2500HD/3500HD 6.6L LML diesel only.
The AIRAID MXP intake replaces the factory airbox and inlet tube with a vehicle-matched cold-air box and intake tube while retaining both factory mass-airflow sensors and the original calibration.
Selected part: 200-295 — red oiled filter 720-472; or 201-295 — dry synthetic filter 721-472. Quantity: one selected complete kit.
Included components
One selected filter, KIT295-1 intake tube, KIT219CAB cold-air box, weatherstrip, EPDM hump hose, KIT295EXT extension harness, four 1/4-20 screws and washers, four #8-32 screws, two #72 hose clamps, filter-minder and blind grommets, T20 bit and decal.
Installation and service
Transfer both factory MAF sensors using the supplied fasteners, not the factory screws. Route the supplied primary-MAF extension harness underneath the tube. Retain the factory filter minder if fitted, or use the blind grommet. Reuse the three specified tray bolts and reinstall any removed fender brace and trim. Inspect hood clearance and every connection before starting.
If the original airbox carries the vehicle-specific VECI emissions label, obtain and install the proper replacement in a readily visible fixed engine-compartment location as instructed; do not attach it to removable intake equipment. Dry filters must not be oiled; service the oiled option with the proper cleaner/oil.
Application-specific emissions evidence
Official CARB EO D-609-19 lists the exact 200/201-295 MPNs for 2013-2016 Chevrolet/GMC HD 2500/3500 6.6L diesel applications. Follow the EO and installation conditions and retain all factory emissions systems. This is not a universal road-legality claim.
