Description
Bilstein B8 8100 (ZoneControl R DSA) Front Right Shock Absorber - Ram/Dodge 2019-2026 - 25-335903 - Each
The Bilstein B8 8100 (ZoneControl R DSA) 25-335903 is supplied as one individual damper. Choose it by the exact chassis, drivetrain, suspension configuration and lift conditions below—not by the diesel engine badge alone.
Fits: 2019–2026 Ram 2500, 6.7L diesel, drive 4WD, Position Front Right, catalog trims Big Horn, Laramie, Laramie Longhorn, Limited, Limited Longhorn, Lone Star, Rebel, Warlock — Fits Vehicles With 2-2.5" Front Lift; Bilstein B12 Special spring kit recommended - 53-317315 for the Diesel engine; 2019–2026 Ram 2500, 6.7L diesel, drive 4WD, Position Front Right, catalog trims Tradesman — Fits Vehicles With 2-2.5" Front Lift; Without Power Wagon Package; Bilstein B12 Special spring kit recommended - 53-317315 for the Diesel engine.
What is included
One front-right (passenger) B8 8100 shock with the matching side-specific reservoir bracket/clamp and installation hardware described in the official bill of materials; the opposite-side shock and lift springs are not included.
Product details
- Manufacturer MPN: 25-335903
- Unit of sale: Each
- Internal Design: Monotube
- Finish: EVO Grey
- Reservoir: Yes
- Body Design: Smooth Body (Non-Coilover)
- Body Diameter (od): 2.65 in.
- Piston Diameter: 60mm
- Boot Included: No
- Spring Seat Included: No
- Adjustable Damping: Double Adjustable Compression with Click Adjuster Knobs
- Lower Mount Type: Eye 14.1mm
- Upper Mount Type: Stem
- Mechanical shock lengths, not shipping-box dimensions: 14.65 inches collapsed / 22.99 inches extended
Installation and supporting components
Installation must be carried out by a qualified suspension technician using the linked Bilstein instructions. Confirm full bump/droop, hose, brake-line, tire, steering and reservoir clearances for the actual suspension, axle and wheel setup. A damper by itself does not create suspension lift.
Corner-specific unit of sale: one front-right (passenger) shock. Its matched opposite-side MPN is 25-302240, sold separately; for a front pair use one of each side, not two identical units. The manufacturer instruction bill of materials confirms only one side-specific reservoir bracket is supplied per shock.
Suspension modifications can change handling and may be limited by local regulations. No universal road-legality or emissions-approval claim is made for this mechanical suspension item.
The front installation instructions require 2–2.5-inch lift springs or spring spacers; for the Cummins diesel Bilstein recommends B12 spring kit 53-317315. Lift springs/spacers and the opposite-side shock are not included. Reservoir bracket installation requires drilling the spring-bucket support as described in the manufacturer guide; confirm wheel/tire and hose clearances.
Manufacturer documents
California Proposition 65: WARNING: Cancer and reproductive harm. See www.P65Warnings.ca.gov.